The effect of austenitizing time on martensite morphologies and magnetic properties of martensite in Fe-24.5%Ni-4.5%Si alloyGUNGUNES, H; YASAR, E; DURLU, T. N et al.Journal of materials science. 2007, Vol 42, Num 15, pp 6102-6107, issn 0022-2461, 6 p.Article

An efficient model for laser surface hardening of hypo-eutectoid steelsORAZI, L; FORTUNATO, A; CUCCOLINI, G et al.Applied surface science. 2010, Vol 256, Num 6, pp 1913-1919, issn 0169-4332, 7 p.Article

Hydrogen trapping in high strength martensitic steel after austenitized at different temperaturesYAN LIU; MAOQIU WANG; GUOQUAN LIU et al.International journal of hydrogen energy. 2013, Vol 38, Num 33, pp 14364-14368, issn 0360-3199, 5 p.Article

Microstructure of martensite in Fe-C-Cr steelYASO, Muneo; MORITO, Shigekazu; OHBA, Takuya et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 481-82, pp 770-773, issn 0921-5093, 4 p.Conference Paper

Mesoscale simulation of the high-temperature austenitizing and dynamic recrystallization by coupling a cellular automaton with a topology deformation techniqueFEI CHEN; ZHENSHAN CUI; JUAN LIU et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2010, Vol 527, Num 21-22, pp 5539-5549, issn 0921-5093, 11 p.Article

Precipitation of Secondary Carbides in M2 High-Speed Steel Modified with Titanium diborideCHAUS, Alexander S; DOMÁNKOVÁ, Mária.Journal of materials engineering and performance. 2013, Vol 22, Num 5, pp 1412-1420, issn 1059-9495, 9 p.Article

Martensite transformation kinetics in 9Cr-1.7W-0.4Mo-Co ferritic steelQIUZHI GAO; CONG WANG; FU QU et al.Journal of alloys and compounds. 2014, Vol 610, pp 322-330, issn 0925-8388, 9 p.Article

Effect of isothermal treatment of SAF 2205 duplex stainless steel on migration of δ/γ interface boundary and growth of austeniteKWANG MIN LEE; HOON SUNG CHO; DAP CHUN CHOI et al.Journal of alloys and compounds. 1999, Vol 285, pp 156-161, issn 0925-8388Article

On the problem of heat treatment of high-chromium steelsCHEILYAKH, A. P.Metal science and heat treatment. 2000, Vol 42, Num 9-10, pp 395-398, issn 0026-0673Article

On the α →γ transformation during dynamic thermal cyclesKALUBA, W. J; TAILLARD, R; JOZWIAK, K et al.Journal de physique. IV. 1996, Vol 6, Num 1, pp C1.215-C1.224, issn 1155-4339Conference Paper

Observation of molybdenum-nitrogen clustering in highly alloyed martensiteLUNDIN, L; ANDREN, H.-O.Applied surface science. 1996, Vol 94-95, pp 320-325, issn 0169-4332Conference Paper

Heterogeneous austenite grain growth in 9Cr martensitic steels: influence of the heating rate and the austenitization temperatureDANON, A; SERVANT, C; ALAMO, A et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2003, Vol 348, Num 1-2, pp 122-132, issn 0921-5093, 11 p.Article

Local orientation change inside lenticular martensite plate in Fe-33Ni alloySHIBATA, A; MORITO, S; FURUHARA, T et al.Scripta materialia. 2005, Vol 53, Num 5, pp 597-602, issn 1359-6462, 6 p.Article

Concentration-Dependent Carbon Diffusivity in AusteniteXIAOTING GU; MICHAL, Gary M; ERNST, Frank et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 9, pp 3790-3799, issn 1073-5623, 10 p.Article

An On-Heating Dilation Conversional Model for Austenite Formation in Hypoeutectoid SteelsLEE, Seok-Jae; CLARKE, Kester D; VAN TYNE, Chester J et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 9, pp 2224-2235, issn 1073-5623, 12 p.Article

A Conversional Model for Austenite Formation in Hypereutectoid SteelsLEE, Seok-Jae; CLARKE, Kester D.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 12, pp 3027-3031, issn 1073-5623, 5 p.Article

Transformation of Austenite at Constant Subcritical TemperaturesDAVENPORT, E. S; BAIN, E. C.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 6, pp 1353-1390, issn 1073-5623, 38 p.Article

Microstructural Features of Austenite Formation in C35 and C45 alloysSAVRAN, V. I; VAN LEEUWEN, Y; HANLON, D. N et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2007, Vol 38, Num 5, pp 946-955, issn 1073-5623, 10 p.Article

Intermediate stages of CrN precipitation during PIII nitriding of austenitic stainless steelMÄNDL, S; DUNKEL, R; HIRSCH, D et al.Surface & coatings technology. 2014, Vol 258, pp 722-726, issn 0257-8972, 5 p.Article

Relation between lattice expansion and nitrogen content in expanded phase in austenitic stainless steel and CoCr alloysMANOVA, D; LUTZ, J; GERLACH, J. W et al.Surface & coatings technology. 2011, Vol 205, issn 0257-8972, S290-S293, SUP2Conference Paper

Surface nanocrystallization, austenization and hardening of medium carbon steel by an explosive impact techniqueTONG, Z; SHI, Z. M; TONG, S. J et al.Surface & coatings technology. 2014, Vol 251, pp 293-299, issn 0257-8972, 7 p.Article

A dilatometric study of the continuous heating transformations in 18wt.% Ni maraging steel of grade 350KAPOOR, R; KUMAR, Lalit; BATRA, I. S et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2003, Vol 352, Num 1-2, pp 318-324, issn 0921-5093, 7 p.Article

Temperature and magnetic field induced strain in Ni₅₀Mn₃₄In₁₆ alloySHARMA, V. K; CHATTOPADHYAY, M. K; CHOUHAN, A et al.Journal of physics. D, Applied physics (Print). 2009, Vol 42, Num 18, issn 0022-3727, 185005.1-185005.5Article

Splitting phenomena occuring in the martensitic transforamtion of Cr13 and CrMoV14 stainless steels in the absence of carbide precipitationGARCIA DE ANDRES, C; JIMENEZ, J. A; ALVAREZ, L. F et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 1996, Vol 27, Num 7, pp 1799-1806, issn 1073-5623, 7 p.Conference Paper

Factors affecting prior austenite grain size in low alloy steelMAROPOULOS, S; KARAGIANNIS, S; RIDLEY, N et al.Journal of materials science. 2007, Vol 42, Num 4, pp 1309-1320, issn 0022-2461, 12 p.Article